PH3 Single Gas Detector
Introduction
K-600 portable gas detector with built-in pump is a new intelligent
gas detector, which adopts an advanced integrated circuit, with
standard intelligent level design technology, and proprietary
digital analog hybrid communication technology. The detector is of
excellent sensitivity and repeatability, which makes it very easy
to use and maintain. Thus greatly meets the safety requirements of
industrial sites with high reliability. The detector is made of
high-strength engineering plastics, compound non-slip rubber, which
is of high strength and good hand feeling. what's more, the
detector is water-proof, dust-proof and explosion-proof. It is
widely used in petroleum, chemical, environmental, metallurgy,
refining, gas transmission and distribution, biochemical medicine,
agricultural and other industries.
Details
* Gas pump sampling method and high-sensitivity sensor,with high
sensitivity and repeatability.
* 32-bit built-in MCU, high reliability and self-adaptation
ability.
* Full functions, easy operation.
* CSTN colorful LCD, more intuitionistic, abundant and clear
indication.
* Compact design, easy carrying.
* High strength engineering plastics and compound anti-slippery
rubber; high strength, water-proof, dust-proof and explosion-proof.
*1200pcs data records, can be contacted with computer via software.
Can print the data records, can store data records, can make the
data analysis.
*Gas curve display.
Parameters
Gas sampling method | Gas pump sampling |
| Accuracy | ≦±5% F.S. |
| Response Time | ≦30s |
| Indication | LCD displays real-time and system status; LED, audio and vibration
alert for gas leakage, fault and low voltage, pump working state. |
| Working environment | -20℃～50℃, ＜95%RH (no dew) |
| Power Source | DC3.7V Li-on battery, 3200mAh |
| Charging time | 6h~8h |
| Working time | ≧8h continuously (without alarming) |
| Gas Sensor Life | 2 years |
| Explosion-proof grade | Ex ib IIBT4 Gb |
| Protection Grade | IP65 |
| Weight | Appr. 400g (with battery) |
| Dimensions | 130mm×67mm×30mm(L × W × H) |
Specification
| gas | Range | Detection Accuracy | 90% Response Time | Minimun Readout | Alarm Set Point Low/High |
| PH3 | 0-2000ppm | ±5%(F.S) | ≦25s | 0.01ppm | 0.3/5ppm |
| O2 | 0-30%vol | ±5%(F.S) | ≦15s | 0.10% | 19.5%/23.0% |
| EX | 0-100%LEL | ±5%(F.S) | ≦5s | 1%LEL | 25.0%/50.0%LEL |
| CO | 0-1000ppm | ±5%(F.S) | ≦25s | 1ppm | 50ppm/100ppm |
| CO2 | 0-5000ppm | ±5%(F.S) | ≦25s | 1ppm | 1000ppm/2000ppm |
| H2S | 0-100ppm | ±5%(F.S) | ≦30s | 1ppm | 10ppm/20ppm |
| NO2 | 0-20ppm | ±5%(F.S) | ≦25s | 0.1ppm | 3ppm/10ppm |
| NO | 0-250ppm | ±5%(F.S) | ≦60s | 1ppm | 25ppm/50ppm |
| SO2 | 0-100ppm | ±5%(F.S) | ≦30s | 0.1ppm | 2ppm/10pppm |
| CL2 | 0-20ppm | ±5%(F.S) | ≦30s | 0.1ppm | 1ppm/10ppm |
| NH3 | 0-100ppm | ±5%(F.S) | ≦50s | 1ppm | 25ppm/50ppm |
| H2 | 0-1000ppm | ±5%(F.S) | ≦60s | 1ppm | 50ppm/10ppm |
| HCN | 0-50ppm | ±5%(F.S) | ≦200s | 0.1ppm | 10ppm/20ppm |
| HCL | 0-20ppm | ±5%(F.S) | ≦60s | 0.1ppm | 5ppm/10ppm |
| CH4 | 0-100%LEL | ±5%(F.S) | ≦5s | 1%LEL | 25.0%/50.0%LEL |
Details
